来源：http://www.ok9868.com 发布时间：2020-09-09 16:12:42 点击：
Injection mold can process products with high efficiency and mass production of various complex plastic products. With high production efficiency and accurate precision, it is favored by many manufacturers. How to make the mold use longer and more efficient is a problem many manufacturers are considering? The service life of the mold is not only good in its own material, but also needs to do some processing for the mold, so that the efficiency of the mold can be doubled with half the effort and the service life can be increased.
First of all, some plastic melts will corrode the surface of the mold cavity in the production process, and some abrasive particles in the raw materials will wear the mold. Therefore, the surface of the mold needs to be electroplated or nickel plated when manufacturing the mold, so as to ensure that the corrosion resistance and wear resistance of the mold are stronger, and the injection mold can be used for a long time.
Secondly, in the forming process of plastic parts, the temperature of the mold cavity sometimes reaches 300 degrees. In order to avoid the influence of high temperature on the mold and make qualified products, the mold must be processed by heat treatment in the manufacturing process to make the mold more efficient and prolong the use time of the mold.
In the manufacturing process of injection mold, advanced equipment should be repeatedly repaired and adjusted to do a variety of processing to ensure the later use of the mold, high production efficiency and long life time.